Unisim Compact Demo Delay

5/1/2018

Please note that due to demand, our in-house Unisim Compact will not be available for demonstration over the next few weeks while we re-arrange our stock of simulator components.

If you are interested in a demonstration please feel free to contact us but please be aware there will be a delay in when we can next accommodate you. We apologise for any inconvenience.

TS-Space Systems in 2018

4/1/2018

And we're back for 2018!

We have recently taken delivery of a new vacuum chamber which we have already started work on getting it ready for commissioning. Some of the new pumps and control units have arrived and we are currently populating and wiring the control/measurement rack units. This new vacuum chamber system will be TVAC#2 and features water cooling on the chamber walls and, importantly, the door seals, which means it will be capable of higher temperature testing than TVAC#1.

We have used the down time of the chamber in the last few weeks of 2017 to further optimise the PID control for the thermal plate in TVAC#1 which means it is now capable of reaching temperature faster and with negligible overshoot. We continue to see a high demand for bakeouts on TVAC#1 and we are working quickly to get TVAC#2 up and running to help with this.

We continue to develop our solar simulators and have a couple of product enhancements planned for 2018 for both our standard Unisim close match range as well as our Unisim Compact. For a free in-house demonstration of our Unisim Compact, please feel free to contact us.

We hope you all had a good break over the Christmas holiday and look forward to working with you over the coming year.

Merry Christmas from TS-Space Systems

20/12/2017

From all of us here at TS-Space Systems, we'd like to wish a Merry Christmas and a Happy New Year to our customers. 2017 has been a busy year for us and we have continued to expand and invest in our product development and test house services.

We are currently awaiting delivery of a new thermal vacuum chamber (TVAC #2) which we will be fitting out with new pumping and thermal systems over the first quarter of 2018. We hope this will take some of the demand from TVAC #1 and mean we can help more of our customers who are on short deadlines for test and flight bakeouts.

Our product development is also scheduled to ramp up in 2018 to bring a new product to market which will take TS-Space Systems into new areas. Keep an eye on our website and social media for updates.

OPENING TIMES:
Please note we will be closed from 23rd December - 1st January. We will be back in on the 2nd of January 2018.

Proud to be Made In Britain

15/11/2017

TS-Space Systems is proud to announce we have joined the 'Made In Britain' community promoting British manufacturing. Supporting British manufacturing is incredibly important to us and we are keen to show this using the 'Made In Britain' marque on our products.

All of our instruments are designed and manufactured in the UK, here at TS-Space Systems. We also subcontract many specialist assembly or manufacturers for components within our products.

To read more about the 'Made In Britain' community of UK manufacturers, click the logo to the right and follow the link.

Test Your Solar Cells For Free!

6/9/2017

We are making our in-house Unisim Compact available for demonstration and testing. You are also welcome, without any obligation, to use our house Compact for a half-day to measure any of the cells on which you are currently working.

The Unisim Compact demonstration covers all of the technical aspects of our close-match solar simulators as well as:

- Changing the filters from AM0 to AM1.5 closematch spectrum
- Tuning the solar simulator spectrum
- Operating the solar simulator as an N-Zone system
- LED Boost zone software and operation
- IV Software operation
- Lamp changes
- Solar simulator Maintenance

If you would like to book a demonstration and/or measurement session please contact us.

For more information on the Unisim Compact Solar Simulator see our product pages.

A Closer Look At Our Test House

12/7/2017

As a small company we are remarkably agile in terms of design, manufacture and installation of test equipment for our in-house test services. This allows us to quickly respond to our customer's test requirements by getting custom components machined and fitted. For our customers, this quick turn around can mean the difference between meeting or missing a deadline.

Urgent Test Requirements

While we do not recommend working under such conditions, we are sometimes asked to help with urgent test requirements with little time to prepare.

We were recently contacted with very short notice for a thermal vacuum test requirement. Less than two weeks after receiving the test procedure document we had begun the test and, even with the chamber not being configured how we would have liked it and the test procedure being altered by the customer 'on-the-fly', the test was completed on schedule. The results of the test were critical to the acceptance of a flight component and as such the customer was able to meet their deadline due to our rapid response.

Large Sample Loads

A customer requirement for baking out hundreds of thermocouples meant pushing the capacity of our TVAC chamber. The down-time between bakeouts gave us a week to measure, design, manufacture, clean and fit spool system for loading the thermocouples. We were constrained by our temperature controlled shroud, but we were able to fit the components in time and complete the bakeout.

Tricky Sample Loading

Our chamber can be fitted with a large a range of temperature controlled shrouds we have manufactured for it. However, we are able to manufacture new shrouds to accommodate samples which are more tricky to mount.

For this particular bakeout the samples need to be suspended in the center of the chamber. We were able to get a design to our highly skilled engineer within the day and continued the re-configuring of the chamber while the machining was being undertaken. Computer controlled DC power supplies were installed into the control rig and the PID software updated to take care of the temperature control of the multi-segment shroud. In a week we had the new shroud installed along with re-routed thermocouples, QCM and cold plate lines. The bakeout was then started on-schedule thanks to our quick turnaround.

Latest news from TS-Space

13/4/2017

Our test facilities for both thermal vacuum testing and ECSS-Q-ST-70-02 outgassing both continue to be in demand. We've recently overhauled our thermal vacuum test chamber (TVAC1) after the turbo pump failed early this year. We have stripped and cleaned the chamber and now have the new turbo installed along with UPS and automated shutdown for the pump and thermal system in the event of power failure. The thermal control has also been upgraded to use a custom built system using the NI CDaq units for accurate PID control of the hot and LN2 modes of the chamber. We've even gone so far as to give TVAC1 its own twitter feed for remote monitoring.

We are beginning a new build of our Unisim Compact solar simulators as our stocks are almost sold out. The latest model has the improved, sliding enclosure for all-round access to the optical enclosure as well as an IV measurement system with source meter as standard. Many of our customers are ordering these with the optional LED boosts fitted. This allows the simulator to be used as a 4-zone system using our 'N-Zone' technique covered on this blog.

If you have any interest in our simulators or test facilities, please feel free to contact us to discuss your requirements.

TSIV Software Update v4.3

12/1/2017

The full installer for our free IV software v4.3 is available to download from our IV software page. Please see our IV software support page for the v4.3 patch fo existing installations as well as update notes.

Test Quote Request Form

4/1/2017

Due to an increase in quote requests for our test services we have a new form for requesting quotes for vacuum testing which can be found here. Although we specialise in custom testing requirements, collating common test requirements using this initial form will help us get your quote out much faster.

We are also in the process of updating our standard outgassing test information to cover regular questions and problems we are asked regarding sample preparation. For our existing customers please note our outgassing charges will remain the same for 2017, so if you used us for your outgassing test work in 2016 and are looking to use us again in 2017, the prices are the same.

Merry Christmas from TS-Space!

14/12/2016

We'd like to wish all of our customers and clients a very Merry Christmas and a Happy New Year!

2016 has seen a particular increase in demand for our in-house test and consultancy services and we are grateful for all of the interest, feedback and references you've given us. We will be working on further expanding our test services in 2017.

We are also always working on our Unisim range of solar simulators which continue to lead the world in solar simulation and 2017 will be no different. We are working on new products, designs and also an expansion of our in-house solar simulator service for next year.

Please note that we will be closing for the Christmas period from the 22/12/16 to 02/01/17 so please contact us with your requirement before then, otherwise we will see you all in 2017!

<<Previous

Forward>>