We have had a very busy start to the year which is why ours news updates have been so few in the past 3 months. We are still very busy with test work (thermal vacuum bakeouts and thermal vacuum cycling) as well as building a large piece of bespoke test equipment for a new customer.

TVAC#1 has been down for maintenance longer than scheduled, primarily due to the sudden influx of test work at the beginning of the year which demanded our attention. We are now just about to begin pumping down and leak testing TVAC#1 and checking the new T/C's and heaters we have fitted. We will also be fitting a PID control unit for the IR heaters to this vacuum chamber so that it has the same capability as TVAC#2.

We have also had delays in obtaining materials required for commissioning our FTIR system for contamination monitoring during bakeouts. We now have everything in stock and will be working to get this established as soon as possible. Our first use of this will be to run blank bakes on our TVAC#1 vacuum test chamber to get it back in service. We will then be able to offer in-house FTIR analysis for contamination control for both our thermal vacuum bakeout facilities.

Finally, we have not reviewed our Outgassing (ECSS-Q-ST-70-02) facility charges for over 4 years and as such a price for this service is planned for later in the year. We will be announcing any changes via our news blog and our newsletter.